Article Details
Summary
This article shows you how to power on, connect, and register a Clover Flex terminal for CardPointe.
Before You Begin
Have your CoPilot equipment order email ready. It is titled "Your CardPointe Terminal Order Has Shipped!" You need the Registration Code in the email to register the device.
Important: If you did not get your terminal registration code by email, contact the Support team.
Reference: PCI compliance standards require this device to connect to a secure, password-protected network.
What Is in the Box
- Clover Flex Quick Start Guide
- Charging cradle
- Power cable
- Receipt paper
- Screwdriver
- Preinstalled SIM card
Steps
Set Up the Clover Flex
- Connect the power cable to the charging cradle.
- Place the Clover Flex on the charging cradle.
- Press and hold the power button until the Clover logo shows on the screen. The Clover Flex powers on and shows the Welcome screen.
- Select a language.
- Press Set Language.
Connect the Clover Flex to the Internet
- On the Network screen, to connect to a Wi-Fi network, tap Configure next to the Wi-Fi option, then select your network.
- To connect to an LTE network instead, tap Configure next to Mobile (SIM card). The device briefly shows "Successfully Connected to Server" when the network setup is done. It then starts to download the CardPointe App and other required parts.
Register the Device in CardPointe
When Clover Flex setup is done, register the device in the CardPointe App. The first time the app launches, it shows the Terminal Registration screen and asks for the registration code from CardConnect.
- On the Terminal Registration screen, tap the empty field to open the keyboard.
- Enter the 8-digit Order ID from your welcome email.
- Tap Continue. The CardPointe app registers the Clover Flex with the CardPointe service.
- On the Registration Complete screen, tap Continue. The CardPointe app shows the Welcome screen.
If Something Goes Wrong
Registration fails. Tap the "Terminal registration failed" banner at the top of the display for troubleshooting information. Write down the error codes in case you need to contact CardPointe support.
Related Articles
- Clover Flex Terminal Topic Outline
- Configure Clover Flex Settings Reference
Comments
0 comments
Article is closed for comments.