Summary

The Bolt S.O.S. menu lets you see the device Version, Date and Time, Server Properties, Ethernet Properties, and Offline Mode.

Steps

Open and Move Through the Menu

1. Press F.
2. Enter the default password with the multi-tap method. [Default password: see your CardPointe terminal documentation.]
3. Press O (green button) to confirm the password and open the Admin Menu.

Then use these keys:

• Press F1 to move left.
• Press F2 to move down.
• Press F3 to move up.
• Press F4 to move right.
• Press O (green button) to select.
• Press < (yellow button) to clear.
• Press X (red button) to cancel or go back to the main menu.

Check the Firmware Version

1. Open the Admin menu.
2. Press O to select Settings.
3. Press O to select Version. The screen shows the firmware version.

Set a Static IP Address

A static IP address is optional. Usually the network gives the device an IP address automatically.

1. Open the Admin menu.
2. Press F2 to move down, then press O to select Configuration.
3. Press F2 to move down, then press O to select IP Settings.
4. Press F2 to move down, then press O to select Configure IP.
5. Press F2 to move down, then press O to select Static IP.
6. Enter the static IP Address on the number pad and press O.
7. Enter the Network Mask and press O.
8. Enter the Gateway Address and press O.
9. Enter DNS Address 1 and press O.
10. Enter DNS Address 2 and press O.

The iSMP4 shows Updating IP configuration and restarting terminal. It then restarts and connects to the Wi-Fi network with the new static setup.

Related Articles

• Ingenico iSMP4 Bolt Terminal Feature Overview
• Enter Text in Ingenico iSMP4 Bolt How-To
• Configure Ingenico iSMP4 Bolt Wi-Fi Settings How-To