Configure Ingenico iSMP4 Bolt Wi-Fi Settings (How To)

Article Details

When the Ingenico iSMP4 Bolt terminal powers on for the first time, the device displays "Unbolted." This indicates that the device is not connected to the Internet, and therefore is not able to connect to your software.

 

Connect to a Wi-Fi Network

  1. Access the Bolt S.O.S. menu. If you are unfamiliar with using the Bolt S.O.S. menu, please see our article on Access and Navigate the Bolt S.O.S. Menu.

  2. Press F2 to scroll down press O (green button) to select Configuration.

  3. Press F2 to scroll down and press O (green button) to select Wifi.

  4. Press O (green button) to Scan for networks. A progress bar displays during the scan and, once complete, a list of available Wi-Fi networks is shown.

  5. Press F2 to scroll down the list and press O (green button) to select the correct Wi-Fi network.

  6. Press O (green button) to select your preferred Wireless Security option.
  7. Enter the Wi-Fi password using the multi-tap method or the on-screen keyboard and press O (green button) when finished. The device displays the message Profile for <Network Name> created.

  8. Press O (green button) to acknowledge the message. The iSMP4 displays a message that a restart is required and then automatically restarts. The device restarts, connects to the Wi-Fi, and displays Bolted at the bottom of the screen when ready for use.

If the device does not restart automatically, press and hold down the .,#* and < (Yellow) keys to manually reboot the device.

 

Manually Add a Wi-Fi Profile

If the iSMP4 cannot detect or successfully connect to a network, or if you want to manually configure a connection, do the following:

  1. Access the Bolt S.O.S. menu.

  2. Press F2 to scroll down and highlight Wifi Properties.

  3. Press O (green button) to select Wifi Properties.

  4. Press F2 to scroll down and press O (green button) to select Add Wifi Profile.

  5. Enter the Wi-Fi network name using the multi-tap method, and press O (green button). The device displays the network name.

  6. Press O (green button) to accept the name, or press X (red button) to return to the previous menu.

  7. Enter the Wi-Fi password using the multi-tap method or the on-screen keyboard and press O (green button) when finished. The device displays the message Profile for <Network Name> created.

  8. Press O (green button) to acknowledge the message. The iSMP4 displays a message that a restart is required and then automatically restarts. The device restarts, connects to the Wi-Fi, and displays Bolted at the bottom of the screen when ready for use.

If the device still displays "Unbolted," check the Wi-Fi connection status.

 

Delete a Wi-Fi Profile

If you entered the network name incorrectly or need to connect to a new network, delete the previously stored Wi-Fi profile as follows:

  1. Access the Bolt S.O.S. menu.

  2. Press F2 to scroll down and highlight Wifi Properties.

  3. Press O (green button) to select Wifi Properties.

  4. Press F2 to scroll down and highlight Delete Wifi Profile.

  5. Press O (green button) to select Delete Wifi Profile.

  6. Press O (green button) to select the Wi-Fi profile to delete. The device displays the message Profile <Network Name> deleted.

  7. Press O (green button) to acknowledge the message.

 

Related Resources

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.