Summary

This article shows you how to set up the Ingenico Lane/5000 payment terminal. It lists what is in the box, how to set up the device, and how to connect it to the internet.

Before You Begin

What is in the box:

• Ingenico Lane/5000 terminal
• Ingenico Multipoint Interface Cable
• Ingenico power supply
• Ingenico stylus

Steps

Set Up the Device

1. Unbox your equipment.
2. Plug the power supply connector into the jack on the Multipoint Interface Cable.
3. Connect the Multipoint Interface Cable to the Multipoint Port on the underside of the terminal.
4. Connect the other end of the Multipoint Interface Cable to an Ethernet port (router, modem, wall jack, or similar).
5. Plug the power supply adapter into a power outlet.
6. Optional: Attach the stylus to the device with the two-sided tape in the box.

Connect the Device to the Internet

1. When the terminal gets power, it starts up.
2. When the terminal gets an IP address, it tries to call the terminal service. If it connects, the terminal shows Connected. If not, it shows Disconnected.
3. When it shows Connected, the device is ready to use. You can leave it on or unplug it from power when needed.

If Something Goes Wrong

If the terminal shows Disconnected, email CardPointe at cardpointesupport@fiserv.com for help.

Related Articles

• Ingenico Lane/5000 Terminal Topic Outline
• Enter Text in Ingenico Lane/5000 How-To
• Use the Ingenico Lane/5000 Admin Menu How-To