The Bolt S.O.S. menu is the Ingenico iSC Touch 250 Bolt terminal's internal menu system that can be accessed through the device's keyboard. The menu allows you to access the device Firmware Version, Date and Time, Server Properties, and Ethernet Properties.

Access and Navigate the Bolt S.O.S. Menu

Press +, 7, 6, 7 on the device's number pad to access the Bolt S.O.S. menu.

• Press + to navigate down.
  
  
• Press - to navigate up.
  
  
• Press O (green button) to select.
  
  
• Press < (yellow button) to clear.
  
  
• Press X (red button) to cancel or return to the main menu.

Check the Device's Firmware Version

1. Access the Bolt S.O.S menu
   
   
2. Press O (green button) to select Version in the menu list. The current firmware version installed is displayed on the screen.
   
   
3. Press X (red button) to return to the main menu.

Set a Static IP Address for the Device

Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connected to the network. To manually set the network settings for the device, follow the steps below.

1. Check your device's firmware version to confirm it is version 1.6.1 or higher. If your device requires a firmware update, please see CardPointe's article Contacting Support.
   
   
2. Press X (red button) on the device's number pad to return to the main menu.
   
   
3. Press + to navigate down the list to Ethernet Properties.
   
   
4. Press O (green button) to select Ethernet Properties.
   
   
5. Press < (yellow button) to toggle the setting from DHCP to Static.
   
   
6. Press O (green button) to edit the static IP settings.
   
   
7. Press + to cycle between the network setting fields. Press O (green button) to enter a new value using the device number pad. Press < (yellow button) to erase the last value.
   
   
8. Press O (green button) to save the value and continue using + to cycle between fields until all the values have been entered.
   
   
9. When finished, press O (green button) to save.
   
   
10. Press O (green button) to continue with a terminal reset.

Related Resources

• Ingenico iSC Touch 250 Bolt Topic Outline
• Set Up the Ingenico iSC Touch 250 Bolt How-To
• Configure Ingenico iSC Touch 250 Bolt Settings Reference
• Customize Visuals for Ingenico iSC Touch 250 Bolt How-To