Feeding report statuses are what you select when using Gingr’s integrated feeding report. Feeding report statuses can be set to charge in coordination with the feeding types you have just set up. For example, if you have the feeding type “House Food” set to charge and the feeding report status “Ate All” set to charge, then when a pet is fed house food and marked as “ate all” on the feeding report, a charge will apply.

Before You Begin

You should have already Set Up Feeding Types.

Set Up Feeding Report Statuses

1. Navigate to Left-hand Navigation: Admin » Feeding.
   
   
2. Locate the Feeding Report Statuses section.
   
   
3. Add or Edit a feeding report status and configure the following fields:
   
   
   • Status: Name the status as you want it to appear on the animal’s feeding schedule and on Gingr’s integrated feeding report.
     
     
   • Charge for Administration: Set to yes if you want the system to apply a charge when this status is selected.
     

     Important:  In order for a charge to apply, both the feeding type and the feeding report status must be set to charge. If only one or neither are set to charge, then no charge will be applied.

     
     
4. Save your new feeding report status and go back one page.

Next Steps

Proceed to Set Up Automated Feeding Charge Pricing Rules.

Related Resources

• Set Up Automated Feeding Charges Process
• Set Up Feeding Types How-To
• Set Up Automated Feeding Charge Pricing Rules How-To